hifi engine

Manual Library / Pioneer

Pioneer SX-2300

Stereo AM/FM Receiver (1988)

add a review (1 review)

Pioneer SX-2300

Specifications

Tuning range: FM, MW

Power output: 60 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 70kHz

Total harmonic distortion: 0.07%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 72dB (MM), 97dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω (minimum)

Dimensions: 420 x 120 x 337mm

Weight: 7kg

Accessories: FM T-type antenna, AM loop antenna

Downloads

Related Catalogues

HiFi Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Aug 14th, 2017 by oldbill

A cheap and cheerful amp that's actually far better than you'd think on paper. The dated graphic equalisor is completely flat when centred and the electronic fet channel switching chip is bombproof, far more reliable than electro mechanical switches better units of the era used. both A-B testing this amp with better quality amps, and signal testing on a bench it holds up well, except a slight attenuation at the very lowest frequencies (if you use a separate sub this won't matter). The only problems seem to be the speaker selections switches. If they play up replace them, or bridge them out completely. If you can get one of these cheap, then its worth considering, especially as amp for a second system.

 

Comments

This website is not affiliated with or sponsored by Pioneer. To purchase SX-2300 spares or accessories, please contact the company via their website or visit an authorised retailer.