hifi engine

Manual Library / Pioneer

Pioneer SX-255R

AM/FM Stereo Receiver (1996)

add a review add a review

Pioneer SX-255R

Specifications

Tuning range: FM, MW

Power output: 100 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.9%

Input sensitivity: 200mV (line)

Signal to noise ratio: 72dB (MM), 96dB (line)

Output: 200mV (line)

Speaker load impedance: 8Ω (minimum)

Dimensions: 420 x 140 x 298mm

Weight: 6.6kg

Accessories: remote control

Year: 1996

Downloads

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: SX-255R

Saw one of these on Ebay and was wondering how the newer Pioneer amps compare to the older SX series.

re: SX-255R

These do have sheer power for a modern "100 watt per channel" receiver. Clean sounding too. Key issue is dimming of the display over time. Of all the BPC receivers I service / check over, these are typically reliable and rarely have issues.

This website is not affiliated with or sponsored by Pioneer. To purchase SX-255R spares or accessories, please contact the company via their website or visit an authorised retailer.