hifi engine

Manual Library / Pioneer

Pioneer SX-424

AM/FM Stereo Receiver (1972-74)

add a review add a review

Pioneer SX-424

Specifications

Tuning range: FM, MW

Power output: 12 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 70kHz

Total harmonic distortion: 1%

Damping factor: 40

Input sensitivity: 6.5mV (mic), 3mV (MM), 180mV (DIN), 180mV (line)

Signal to noise ratio: 75dB (MM), 85dB (line)

Output: 180mV (line), 36mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 1 x FET, 30 x transistors, 24 x diodes

Dimensions: 431 x 146 x 347mm

Weight: 7.9kg

Accessories: FM T-type antenna

Downloads

Related Catalogues

Hi-Fi Stereo

HiFi Stereo Components

Stereo Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: SX-424

Hi,
I have a problem with the stereo light and the signal meter. If stereo is tune it do not moves and stereo light doesn't come. In AM the signal meter moves.
What can it be, really appreciate and input,
J.J.

Thank You

Thank you very much, I had used t more than 30 Years ago it is very nice and good in sound.

This website is not affiliated with or sponsored by Pioneer. To purchase SX-424 spares or accessories, please contact the company via their website or visit an authorised retailer.