hifi engine

Manual Library / Pioneer

Pioneer VSX-519V

Audio Video Multi Channel Receiver (2009)

add a review add a review

Pioneer VSX-519V


Tuning range: FM, MW

Power output: 100 watts per channel into 8Ω (stereo)

Surround output: 100W (front), 100W (center), 100W (rear)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.2%

Input sensitivity: 200mV (line)

Signal to noise ratio: 98dB (line)

Output: 200mV (line)

Speaker load impedance: 6Ω to 16Ω

Digital inputs: coaxial, optical

Video Connections: HDMI, component, composite

Dimensions: 420 x 158 x 347.7mm

Weight: 8.8kg

Accessories: remote control



colin44ct357's picture

re: VSX-519V

When the hdmi fails rework into a 6 x 100wrms power amp. Thats what i am busy doing.
Keep it in the box and fit a power switch in the press button hole.
Use a dpdt switch to switch power and the standby relay to prevent noisy power down.
Sad, but that is what i do with blown hdmi units.
Colin CT SA.

This website is not affiliated with or sponsored by Pioneer. To purchase VSX-519V/VSX-519V-K/VSX-519V-S spares or accessories, please contact the company via their website or visit an authorised retailer.