hifi engine

Manual Library / Pioneer

Pioneer VSX-D703S

Audio Video Stereo Receiver (1994)

add a review add a review

Pioneer VSX-D703S


Tuning range: FW, MW

Power output: 130 watts per channel into 8Ω (stereo)

Surround output: 100W (front), 100W (center), 50W (rear)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.05%

Input sensitivity: 2.8mV (MM), 200mV (line)

Signal to noise ratio: 76dB (MM), 97dB (line)

Output: 200mV (line)

Speaker load impedance: 8Ω to 16Ω

Video Connections: composite, SVHS

Dimensions: 420 x 162 x 414mm

Weight: 12.3kg

Accessories: remote control

Year: 1994



re: VSX-D703S

how can i connect my ipod to this stereo?

re: VSX-D703S

The easiest way would be to get a 3.5mm to stereo RCA cable, plug the 3.5mm plug into the iPod headphone socket and the RCAs into one of the spare line inputs on the receiver (CD, Aux, Tape in etc).

This website is not affiliated with or sponsored by Pioneer. To purchase VSX-D703S spares or accessories, please contact the company via their website or visit an authorised retailer.