hifi engine

Manual Library / Pioneer

Pioneer VSX-D903S

Audio Video Stereo Receiver (1994)

add a review add a review

Pioneer VSX-D903S


Tuning range: FW, MW

Power output: 130 watts per channel into 8Ω (stereo)

Surround output: 100W (front), 100W (center), 50W (rear)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.05%

Input sensitivity: 2.8mV (MM), 200mV (line)

Signal to noise ratio: 76dB (MM), 97dB (line)

Output: 200mV (line)

Speaker load impedance: 8Ω to 16Ω

Video Connections: composite, SVHS

Dimensions: 420 x 162 x 425mm

Weight: 13kg

Accessories: remote control

Year: 1994



re: VSX-D903S

I can not activate 5 channels distorts. As stereo works ok. Bad multiplex card.

re: VSX-D903S

Voltage selector switch, akx-507 broken. Could anyone help which pins join to gain 230V...?

re: VSX-D903S

How did you do it and which pins did you join to gain 220/230V? My vsx-D1S has the same problem, also multi voltage like yours.

re: VSX-D903S

solved. Got the clue about the connection and threw the switch out

re: VSX-D903S

Which wires are needed for 220v?

re: VSX-D903S

Looking for Audio Video Programmable Remote manual.

This website is not affiliated with or sponsored by Pioneer. To purchase VSX-D903S spares or accessories, please contact the company via their website or visit an authorised retailer.