hifi engine

Manual Library / QSC

QSC 1100

Stereo Power Amplifier

add a review add a review

QSC 1100

Specifications

Power output: 50 watts per channel into 8Ω (stereo), 140W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.1%

Damping factor: 200

Gain: 26 dB

Input sensitivity: 1V

Signal to noise ratio: 100dB

Speaker load impedance: 4Ω (minimum)

Dimensions: 19 x 1.75 x 8.7 inches

Weight: 5.4kg

Downloads

Comments

re: 1100

Predecessor to 1100 is 1080, using same chassis. Power is 35 W per channel @ 8 ohms, 50 W @ 4 ohms. Schematic is dated May 1984, other performance specifications are virtually identical to those of 1100.

This website is not affiliated with or sponsored by QSC. To purchase 1100 spares or accessories, please contact the company via their website or visit an authorised retailer.