hifi engine

Manual Library / QSC

QSC 1200

Stereo Power Amplifier

add a review add a review

QSC 1200

Specifications

Power output: 100 watts per channel into 8Ω (stereo), 300W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.1%

Damping factor: 200

Gain: 29 dB

Input sensitivity: 1V

Signal to noise ratio: 100dB

Speaker load impedance: 4Ω (minimum)

Dimensions: 19 x 5.25 x 9.5 inches

Weight: 10.8kg

Downloads

Comments

re: 1200

Single channel version was model 1151, rated 110 W @ 8 ohms, 160 @ 4 ohms. It was a very short-lived model, using same chassis as 1200 and 1400 models. Circuit boards were only stuffed with channel one components, otherwise 1151 and 1200 are almost identical.

This website is not affiliated with or sponsored by QSC. To purchase 1200 spares or accessories, please contact the company via their website or visit an authorised retailer.