hifi engine

Manual Library / QSC

QSC Powerlight 1

Stereo Power Amplifier

add a review add a review

QSC Powerlight 1

Specifications

  • Power output: 200 watts per channel into 8Ω (stereo), 650W into 8Ω (mono)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Damping factor: 350

    Gain: 32 dB

    Input sensitivity: 1V

    Signal to noise ratio: 108dB

    Speaker load impedance: 4Ω (minimum)

    Dimensions: 19 x 3.5 x 17.9 inches

    Weight: 8.2kg

  • Power output: 300 watts per channel into 8Ω (stereo), 1000W into 8Ω (mono)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Damping factor: 350

    Gain: 34 dB

    Input sensitivity: 0.96V

    Signal to noise ratio: 108dB

    Speaker load impedance: 4Ω (minimum)

    Dimensions: 19 x 3.5 x 17.9 inches

    Weight: 8.2kg

  • Power output: 400 watts per channel into 8Ω (stereo), 1300W into 8Ω (mono)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Damping factor: 350

    Gain: 34 dB

    Input sensitivity: 1.14V

    Signal to noise ratio: 108dB

    Speaker load impedance: 4Ω (minimum)

    Dimensions: 19 x 3.5 x 17.9 inches

    Weight: 8.2kg

Downloads

Comments

This website is not affiliated with or sponsored by QSC. To purchase Powerlight 1 spares or accessories, please contact the company via their website or visit an authorised retailer.