hifi engine

Manual Library / Quad

Quad 22

Stereo Pre Amplifier

add a review (1 review)

Quad 22


The Quad 22 control unit may be used with a single Quad II power amplifier for single channel installation, or with two Quad II power amplifiers to provide single channel and stereo reproduction.


Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.02%

Input sensitivity: 1.5mV (mic), 0.4mV (MM), 70mV (line)

Signal to noise ratio: 70dB (line)

Output: 250mV (line), 1.4V (Pre out)

Valve complement: 2 x EF86, 2 x ECC83


Related Catalogues

The First 50 Years

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Sep 28th, 2013 by dominiquemichel

As I wrote for the Quad II amplifier, the Quadd 22 have small sized electrolityc capacitors. After changing them by new values in order to get 20 Hz without feedback in all stages, the sound is just better, and not only in the basses. The overall sound become cleaner and more precise, and the dynamic get much better in the basses.

Without these modiications, I will put it 7 or 8 stars, mainly because of the lack of attack in the basses with music styles like jazz-rock.



This website is not affiliated with or sponsored by Quad. To purchase 22 spares or accessories, please contact the company via their website or visit an authorised retailer.