hifi engine

Manual Library / Realistic

Realistic STA-110

AM/FM Stereo Receiver (1982)

add a review add a review

Realistic STA-110


Tuning range: FM, MW

Power output: 22 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.08%

Input sensitivity: 2.2mV (MM), 160mV (DIN), 160mV (line)

Signal to noise ratio: 86dB (MM), 90dB (line)

Output: 140mV (line), 3.3mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 18-1/4 x 5-1/2 x 10-1/8 inches

Finish: walnut grain vinyl case

Year: 1982

Price: USD $279.95 (1982)



re: STA-110

The STA-110 replaced the STA-100 in 1982 and ran through 1983. Manufactured by Tandy Electronics in Korea, it exemplifies the watering down in quality taking place in early 80's audio. The top half of the back panel is chipboard, chintzy looking LEDs adorn the front panel. That said a serviceable receiver that should be available for little money.

This website is not affiliated with or sponsored by Realistic. To purchase STA-110 spares or accessories, please contact the company via their website or visit an authorised retailer.