hifi engine

Manual Library / Realistic

Realistic STA-2250

Digital Synthesized Stereo Receiver (1983)

add a review add a review

Realistic STA-2250


Tuning range: FM, MW

Power output: 50 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.05%

Input sensitivity: 2.2mV (MM), 160mV (line)

Signal to noise ratio: 85dB (MM), 90dB (line)

Output: 150mV (line), 3.3mV (DIN)

Dimensions: 490 x 130 x 350mm

Year: 1983



re: STA-2250

Sweet sounding machine. Had to work out the subs for a blown amp, detailed in a thread on the AK for future use. They are worth sinking some $$ into. Good crossover looks wise from the analog silver w/wood era for the black case digital era.

The screw connectors for speakers are so early 70's but endemic of a lot of RS stuff until their stuff became obvious pioneer rebrands.

vermontaigne's picture

re: STA-2250

The power is understated in the spec, probably puts out 60 wpc into 8 ohms, easily. Can drive into low ohms without breaking a sweat. Tuner not great to use, because the then-futuristic controls take getting used to. Heavy. Built like an unobtainium tank. Recommend.

This website is not affiliated with or sponsored by Realistic. To purchase STA-2250 spares or accessories, please contact the company via their website or visit an authorised retailer.