hifi engine

Manual Library / Realistic

Realistic STA-64

AM/FM Stereo Receiver (1977-78)

add a review (1 review)

Realistic STA-64

Specifications

Tuning range: FM, MW

Power output: 16 watts per channel into 8Ω (stereo)

Frequency response: 15Hz to 30kHz

Total harmonic distortion: 0.8%

Input sensitivity: 2.5mV (MM), 250mV (DIN), 150mV (line)

Signal to noise ratio: 65dB (MM), 75dB (DIN), 70dB (line)

Output: 250mV (line), 25mV (DIN)

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed Dec 11th, 2017 by

This is a really nice, solid receiver. I am amazed at the power coming out of this box. Inside, the controls are easily accessed to be cleaned/replaced. LED upgrade can be quickly performed without massive disassembly - everything is on top. The FM Tuner grabs channels with ease. Bass and Treble response are great! I would have liked a Midrange tone control. The Walnut veneer is really attractive - especially when rubbed out with Danish Oil.

 

Comments

re: STA-64

The STA-64 was a big seller for the Shack. The '64 really didn't replace a particular receiver; it was inserted between the STA-52 and STA-77A as the line expanded approaching the peak audio years. Solidly built by Tandy Electronics in Korea.

This website is not affiliated with or sponsored by Realistic. To purchase STA-64 spares or accessories, please contact the company via their website or visit an authorised retailer.