hifi engine

Manual Library / Rogers

Rogers Panthera A75

Integrated Stereo Amplifier

add a review add a review

Rogers Panthera A75


The Panthera A75 is the first model in a new range of professional quality equipment styled by Murdoch and Gibbs.

Developed from the established Ravensbourne design, the new amplifier is conservatively rated at 37.5 + 37.5 watts RMS and offers a blend of performance, reliability, flexibility and styling to make it a class leader for years to come.

Inputs are provided for disc, tuner, tape and auxiliary, all via DIN sockets.

Four pre-set disc sensitivities cater for virtually all high quality pick-up cartridges, including those with very low output.


Power output: 37.5 watts per channel into 8Ω (stereo)

Frequency response: 25Hz to 35kHz

Total harmonic distortion: 0.06%

Damping factor: 60

Input sensitivity: 2.5mV (MM), 170mV (line)

Signal to noise ratio: 60dB (MM), 75dB (line)

Output: 170mV (line)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 22 x transistors

Dimensions: 362 x 286 x 117mm

Weight: 7kg



This website is not affiliated with or sponsored by Rogers. To purchase Panthera A75 spares or accessories, please contact the company via their website or visit an authorised retailer.