hifi engine

Manual Library / Rotel

Rotel RB-985

5-Channel Power Amplifier

add a review add a review

Rotel RB-985

Specifications

  • Power output: 100 watts per channel into 8Ω (stereo), 100W (5 channel)

    Frequency response: 10Hz to 80kHz

    Total harmonic distortion: 0.03%

    Damping factor: 180

    Signal to noise ratio: 115dB

    Speaker load impedance: 4Ω (minimum)

    Dimensions: 440 x 139 x 396mm

    Weight: 15.5kg

  • Power output: 100 watts per channel into 8Ω (stereo), 100W (5 channel)

    Frequency response: 10Hz to 80kHz

    Total harmonic distortion: 0.03%

    Damping factor: 180

    Input sensitivity: 1V

    Signal to noise ratio: 115dB

    Speaker load impedance: 4Ω (minimum)

    Dimensions: 440 x 139 x 396mm

    Weight: 15.5kg

Downloads

Comments

re: RB-985

Although the RB-985-Mk2 has internal DC supply fuses for each channel there are no relays or fuses in the loudspeaker output lines.
The protection system fitted disconnects the input signal if the amp is getting too hot or the output current is excessive.
Therefore the protection system cannot always protect the speakers if there's a fault.

This website is not affiliated with or sponsored by Rotel. To purchase RB-985 spares or accessories, please contact the company via their website or visit an authorised retailer.