hifi engine

Manual Library / Rotel

Rotel RT-950

AM/FM Stereo Tuner

add a review add a review

Rotel RT-950

Specifications

Type: Mono/Stereo Tuner

Tuning Bands: FM, MW, LW

Tuning Scale: Digital

Sensitivity: 0.95uV (FM), 350uV (MW), 750uV (LW)

Signal to Noise Ratio: 75dB (FM), 55dB (MW), 55dB (LW)

Distortion: 0.25% (FM)

Selectivity: 63dB (FM), 42dB (MW)

Frequency response: 30Hz to 15kHz (FM)

Output: 1000mV (FM)

Dimensions: 440 x 72 x 284mm

Weight: 3.6kg

Downloads

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: RT-950

Can anyone please advise on Rotel 950BX tuner. I know its an old tuner but it has worked fine for last c 20 years, until this week when it has stopped tuning into FM stations - still works on AM stations. Thanks for your help. Geoff

re: RT-950

Had exactly the same problem with this model.

I narrowed the problem down to oxidation on the film trimmer capacitors, CT102, CT103 and CT104. Gave them a light spray of electrical contact switch cleaner, (Servisol Super 10) and gave them a turn ever so slightly and then back to where they were.

Radio is auto tuning again and has been working now for 13 hours.

It's a fantastic radio, hope this helps to keep it going.

This website is not affiliated with or sponsored by Rotel. To purchase RT-950 spares or accessories, please contact the company via their website or visit an authorised retailer.