hifi engine

Manual Library / Rotel

Rotel RX-1000

AM/FM Stereo Receiver

add a review add a review

Rotel RX-1000

Specifications

  • Tuning range: FM, MW

    Power output: 35 watts per channel into 8Ω (stereo)

    Frequency response: 5Hz to 40kHz

    Total harmonic distortion: 0.06%

    Damping factor: 35

    Input sensitivity: 2.5mV (MM), 150mV (DIN), 150mV (line)

    Signal to noise ratio: 75dB (MM), 90dB (DIN), 90dB (line)

    Output: 280mV (line), 90mV (DIN)

    Speaker load impedance: 4Ω to 16Ω

    Dimensions: 430 x 98 x 290mm

    Weight: 7.7kg

  • Tuning range: FM, MW, LW

    Power output: 35 watts per channel into 8Ω (stereo)

    Frequency response: 5Hz to 40kHz

    Total harmonic distortion: 0.06%

    Damping factor: 35

    Input sensitivity: 2.5mV (MM), 150mV (DIN), 150mV (line)

    Signal to noise ratio: 75dB (MM), 90dB (DIN), 90dB (line)

    Output: 280mV (line), 90mV (DIN)

    Speaker load impedance: 4Ω to 16Ω

    Dimensions: 430 x 98 x 290mm

    Weight: 7.7kg

Downloads

Comments

This website is not affiliated with or sponsored by Rotel. To purchase RX-1000 spares or accessories, please contact the company via their website or visit an authorised retailer.