hifi engine

Manual Library / Rotel

Rotel RX-200

Solid State Stereo Receiver (1972-73)

add a review add a review

Rotel RX-200

Specifications

  • Tuning range: FM, MW

    Power output: 10 watts per channel into 8Ω (stereo)

    Frequency response: 30Hz to 20kHz

    Total harmonic distortion: 0.2%

    Damping factor: 30

    Input sensitivity: 2mV (MM), 250mV (line)

    Signal to noise ratio: 60dB (MM), 70dB (line)

    Speaker load impedance: 4Ω to 16Ω

    Dimensions: 14.25 x 4 x 8.25 inches

    Weight: 11lbs

  • Tuning range: FM, MW

    Power output: 10 watts per channel into 8Ω (stereo)

    Frequency response: 30Hz to 30kHz

    Total harmonic distortion: 0.5%

    Damping factor: 30

    Input sensitivity: 2.2mV (MM), 330mV (DIN), 250mV (line)

    Signal to noise ratio: 65dB (MM), 70dB (line)

    Speaker load impedance: 4Ω to 16Ω

    Dimensions: 14.25 x 4 x 8.25 inches

    Weight: 5kg

    Year: 1973

Downloads

Comments

This website is not affiliated with or sponsored by Rotel. To purchase RX-200/RX-200A spares or accessories, please contact the company via their website or visit an authorised retailer.