hifi engine

Manual Library / Rotel

Rotel RX-203

AM/FM Stereo Receiver (1979)

add a review add a review

Rotel RX-203

Specifications

  • Tuning range: FM, MW

    Power output: 20 watts per channel into 8Ω (stereo)

    Frequency response: 5Hz to 70kHz

    Total harmonic distortion: 0.5%

    Damping factor: 35

    Input sensitivity: 2.5mV (MM), 120mV (ceramic), 150mV (DIN), 150mV (line)

    Signal to noise ratio: 75dB (MM), 85dB (line)

    Output: 300mV (line), 100mV (DIN)

    Speaker load impedance: 4Ω to 16Ω

    Dimensions: 410 x 130 x 280mm

    Weight: 7kg

  • Tuning range: FM, MW

    Power output: 20 watts per channel into 8Ω (stereo)

    Frequency response: 5Hz to 70kHz

    Total harmonic distortion: 0.1%

    Damping factor: 40

    Input sensitivity: 2.5mV (MM), 120mV (ceramic), 150mV (DIN), 150mV (line)

    Signal to noise ratio: 75dB (MM), 85dB (line)

    Output: 300mV (line), 100mV (DIN)

    Speaker load impedance: 4Ω to 16Ω

    Dimensions: 400 x 125 x 252mm

    Weight: 7kg

Downloads

Comments

This website is not affiliated with or sponsored by Rotel. To purchase RX-203/RX-203A spares or accessories, please contact the company via their website or visit an authorised retailer.