hifi engine

Manual Library / Rotel

Rotel RX-880

AM/FM Stereo Synthesizer Receiver

add a review (1 review)

Rotel RX-880

Specifications

Tuning range: FM, MW

Power output: 80 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 70kHz

Total harmonic distortion: 0.009%

Damping factor: 47

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 80dB (MM), 95dB (line)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 430 x 115 x 340mm

Weight: 10.5kg

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed Dec 28th, 2017 by pcaetano

Built like a tank, it's a powerhouse ! With its very conservative 80 w/ch, is able to manage any speakers easily. This model has a Quasi-Class A circuit, claiming only an impressive low 0.009% THD. The down-side is that the device become very hot, even a low-level volume. The receiver is very sensitive, and all stations are locked perfectly . The phono amp works very well too ( MM only ). A nice piece of vintage gear !

 

Comments

This website is not affiliated with or sponsored by Rotel. To purchase RX-880 spares or accessories, please contact the company via their website or visit an authorised retailer.