hifi engine

Manual Library / SAE

SAE 2400

Solid State Stereo Power Amplifier (1977-78)

add a review add a review

SAE 2400

Description

The workhorse of our line, the 2400 offers power and performance in a surprisingly compact package.

Incorporating fully complementary circuitry, and series output design, the amplifier will reproduce the most demanding program material without strain.

Monitoring power output are two 5.5" meters which show signal output from 10mW to full rated power, plus overload.

Specifications

  • Power output: 200 watts per channel into 8Ω (stereo)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.05%

    Damping factor: 150

    Input sensitivity: 1.5V

    Signal to noise ratio: 100dB

  • Power output: 200 watts per channel into 8Ω (stereo)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.05%

    Damping factor: 150

    Input sensitivity: 1.5V

    Signal to noise ratio: 100dB

    Speaker load impedance: 4Ω (minimum)

    Dimensions: 483 x 178 x 292mm

    Weight: 21.3kg

    Accessories: optional C-2 cabinet

Downloads

Related Catalogues

Full Line

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

This website is not affiliated with or sponsored by SAE. To purchase 2400/2400L spares or accessories, please contact the company via their website or visit an authorised retailer.