hifi engine

Manual Library / Sansui

Sansui 1000A

FM Stereo Receiver (1967-69)

add a review (1 review)

Sansui 1000A

Description

The 1000A has a music power output of 100 watts and features an amazingly low distortion factor of not more than 0.8% at 76 watts.

A high quality amplifier with many exciting features, it is delivered to you with Sansui's fullest confidence.

And this top quality amplifier has a super sensitive tuner of RF amplifier consisting of two Nuvisotors.

Specifications

Tuning range: FM, MW

Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.8%

Damping factor: 9.5

Input sensitivity: 1.8mV (mic), 1.5mV (MM), 110mV (line)

Signal to noise ratio: 70dB (MM), 90dB (line)

Channel separation: 55dB (MM)

Speaker load impedance: 8Ω to 16Ω

Semiconductors: 4 x transistors, 16 x diodes

Valve complement: 2 x 6CW4, 3 x 6BA6, 1 x 6BE6, 2 x 6AU6, 3 x 6AQ8, 2 x 12AX7, 1 x 12AU7, 1 x 6BL8, 2 x 6AN8, 4 x 7591

Dimensions: 17-7/8 x 14-3/16 x 5-1/2 inches

Weight: 44.7lbs

Year: 1967

Downloads

Related Catalogues

Stereo

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Jan 31st, 2017 by angielarge

I have just acquired one of these amazing valve amps and been using in conjunction with a pair of 1966 Goodmans eleganzia 2's speakers which are rated at 16 ohms. The results are truly breathtaking. The warm sound added with superb bass control and superb dynamics can only be described as amazing. very highly recommended.

 

Comments

re: 1000A

Does anyone have the schematic for the later version having four bias potentiometers for the output tubes, please upload.

BR Henrik

Service Manual for Sansui 1000A

hi,

If anyone has the service manual for Sansui's 1000A, please upload so I can use it...I need it badly to do the repair.

Thanks,

Keith

This website is not affiliated with or sponsored by Sansui. To purchase 1000A spares or accessories, please contact the company via their website or visit an authorised retailer.