hifi engine

Manual Library / Sansui

Sansui A-900

DC Servo Integrated Amplifier (1982-85)

add a review add a review

Sansui A-900

Specifications

Power output: 70 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 60kHz

Total harmonic distortion: 0.05%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 72dB (MM), 95dB (line)

Output: 130mV (line)

Speaker load impedance: 8Ω (minimum)

Dimensions: 430 x 112 x 250mm

Weight: 5.9kg

Downloads

Related Catalogues

World

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: A-900

I've just dug this old girl out of storage after about 25 years. It appears to work but it has a horrible 60Hz hum in the audio output through both speakers. Could this be bad/dried out electrolytic filter capacitors in the power supply? If not, anywhere else I could look?

Doug

This website is not affiliated with or sponsored by Sansui. To purchase A-900 spares or accessories, please contact the company via their website or visit an authorised retailer.