hifi engine

Manual Library / Sansui

Sansui A-E750

Integrated Stereo Amplifier

add a review add a review

Sansui A-E750


Power output: 90 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 60kHz

Total harmonic distortion: 0.07%

Input sensitivity: 0.6mV (mic), 3.2mV (MM), 200mV (line)

Signal to noise ratio: 72dB (MM), 90dB (line)

Output: 160mV (line)

Speaker load impedance: 8Ω (minimum)

Dimensions: 380 x 111 x 298mm

Weight: 7.1kg


Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: A-E750

Does anyone know how to change the voltage on this?

re: A-E750

Sebby90: I forgot to tell you that you have use a screwdriver to pop out the plug in the center of the multi-voltage adapter. There are two small holes that you can fit a small screwdriver into to start the removal of the plug. Once it is out you can then rotate it to align the correct voltage with the arrow and then just push it back in.

re: A-E750

If the transformer does not have the proper number of windings already on it you will not be able to change the voltage unless you want to rewind the transformer. Some were made for North America only and as such do have the ability to change voltage. If this unit has the ability to change voltage there will be a switch on the back to allow you to switch to another voltage. Turn the rotary switch until the arrow aligns with the proper voltage of your area. DO THIS WITH THE UNIT UNPLUGGED FIRST !!!
Here is a link with a picture of the switch on a unit that can change voltage.


This website is not affiliated with or sponsored by Sansui. To purchase A-E750 spares or accessories, please contact the company via their website or visit an authorised retailer.