hifi engine

Manual Library / Sansui

Sansui AU-70

Stereophonic Pre/Main Amplifier (1965)

add a review add a review

Sansui AU-70

Specifications

Power output: 25 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 80kHz

Total harmonic distortion: 0.95%

Input sensitivity: 0.9mV (mic), 1.1mV (MM), 50mV (line)

Signal to noise ratio: 52dB (line)

Speaker load impedance: 8Ω to 16Ω

Valve complement: 4 x 7189, 2 x 6AN8, 3 x 12AX7

Dimensions: 405 x 320 x 142mm

Weight: 13.7kg

Downloads

Comments

This website is not affiliated with or sponsored by Sansui. To purchase AU-70 spares or accessories, please contact the company via their website or visit an authorised retailer.