hifi engine

Manual Library / Sansui

Sansui G-871DB

Pure Power DC Stereo Receiver (1979-80)

add a review add a review

Sansui G-871DB


The G-871DB has a 160 watt per channel power amplifier featuring two RIAA phono inputs, a pair of tape loops, a three stage tone control, a subsonic (16Hz) and high level (3KHz) filter, and audio muting.


Tuning range: FM, MW

Power output: 160 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 80kHz

Total harmonic distortion: 0.025%

Damping factor: 60

Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 78dB (MM), 95dB (line)

Channel separation: 60dB (MM), 70dB (line)

Output: 150mV (line)

Speaker load impedance: 8Ω (minimum)

Dimensions: 560 x 201 x 475mm

Weight: 21kg



This website is not affiliated with or sponsored by Sansui. To purchase G-871DB spares or accessories, please contact the company via their website or visit an authorised retailer.