hifi engine

Manual Library / Sansui

Sansui SP-20000

3-Way Loudspeaker System

add a review add a review

Sansui SP-20000

Description

The SP-20000 is a full bodied speaker system entirely without a personality of its own. That's good.

The sound waves it puts out are exact conversions of the electrical impulses it receives from your amplifier or receiver.

Thus good or bad. The material you feed it is reproduced as accurately and objectively as the medium of high fidelity can achieve. When you hear the results you'll definitely agree that this is good thing number one.

Good thing number two is the fact that two of its three active speaker drivers employ a revolutionary Sansui development called the Direct Drive Ring Diaphragm, or DDRD for short, to improve phase response, transient response and frequency response.

The tweeter and midrange units in the SP-20000 are the first commercially available speakers to use this unique system.

Specifications

Type: 3 way, 4 driver loudspeaker system

Frequency Response: 25Hz to 40kHz

Power Handling: 100W

Crossover Frequency: 1500, 7000Hz

Impedance: 8Ω

Sensitivity: 93dB

Bass Radiator: 1 x 255mm cone

Bass: 1 x 255mm cone

Midrange: 1 x 90mm horn

Tweeter: 1 x 40mm horn

Finish: brazillian rosewood veneer

Dimensions: 376 x 786 x 988mm

Weight: 33.3kg

Downloads

Comments

This website is not affiliated with or sponsored by Sansui. To purchase SP-20000 spares or accessories, please contact the company via their website or visit an authorised retailer.