hifi engine

Manual Library / Sansui

Sansui TU-999

AM/FM Solid State Stereophonic Tuner (1970-71)

add a review add a review

Sansui TU-999

Description

Here it is, the Sansui 'some day' machine, engineered and styled for the future. The one advanced audio enthusiasts meant when they talked about 'some day'.

The all new Sansui TU-999 AM/FM stereo tuner, a tuner with advances like an FM front end that combines a linear 4-gang capacitor and three FETs for extraordinary sensitivity. That's us.

A tuner that employs such technical innovations as three ICs, a crustal filter and a block filter to attain an ideal IF characteristic. That's us.

A tuner with an FM AGC changeover switch, both 75 and 300 ohm antenna inputs, a wide dial linear FM scale and two output terminals.

Some day they said somebody will come out with a tuner like that. Hey! That's us. You're talking about our TU-999, designed for complete compatibility with the equally advanced AU-999 solid state Control Amplifier, but certain to improve the performance of any quality stereo system.

Specifications

Type: Mono/Stereo Tuner

Tuning Bands: FM, MW

Tuning Scale: Analogue

FM Tuning Range: 88 to 108 MHz

MW Tuning Range: 535 to 1605 kHz

Sensitivity: 1.8uV (FM), 150uV (MW)

Signal to Noise Ratio: 65dB (FM)

Distortion: 0.5% (FM)

Selectivity: 70dB (FM), 20dB (MW)

Output: 2000mV

Semiconductors: 32 x transistors, 3 x FET, 3 x IC, 22 x diodes

Dimensions: 155 x 435 x 316mm

Weight: 10.1kg

Downloads

Comments

This website is not affiliated with or sponsored by Sansui. To purchase TU-999 spares or accessories, please contact the company via their website or visit an authorised retailer.