hifi engine

Manual Library / Sentec

Sentec SC 9

Line level pre-amplifier with 6 inputs

add a review add a review

Sentec SC 9


The SC9 is an all discrete design using high quality long-life components in a carefully well thought out circuit layout.

As we do recommend short speaker cords with the power amplifiers close to the speakers, the SC9 utilises class-A cable-driver main output stages which are able to feed long signal cables of any brand.

Through the use of double-sided glass reinforced through-plated circuit boards with a decoupled ground plane, separated from the signal ground path, the SC9 is very insensitive to radio interference carried by the incoming signal cable shields.

In order to achieve the shortest possible internal signal path and liberty in furnishing, we have built the SC9 in a very compact and sturdy cabinet for easy placement close to your listening position.


Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.05%

Input sensitivity: 200mV (line)

Signal to noise ratio: 110dB (line)

Output: 200mV (line), 1V (Pre out), 5.6V (Pre out Max)

Dimensions: 338 x 66 x 150mm

Weight: 2kg



This website is not affiliated with or sponsored by Sentec. To purchase SC 9 spares or accessories, please contact the company via their website or visit an authorised retailer.