hifi engine

Manual Library / Sharp

Sharp SM-3636H

Stereo Integrated Amplifier

add a review (1 review)

Sharp SM-3636H

Specifications

Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 70kHz

Total harmonic distortion: 0.05%

Damping factor: 40

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 70dB (MM), 90dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω (minimum)

Semiconductors: 2 x IC, 22 x transistors, 4 x FET, 23 x diodes

Dimensions: 442 x 144 x 363mm

Weight: 14.5kg

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed May 08th, 2015 by optonicaAU

Huge head room, via true mono block construction. 45 watts that sounds more like my Yamaha CA-1020's 120 watts.

 

Comments

re: SM-3636H

A magnificent bit of kit from the late 1970s. I have 2 if these and a SM-4646H to tri-amp my optonica CP-5000h speakers. True dual mono block construction amps feeding 28kg speakers with woofers suspisciusly similar to those in the much admired Yamaha NS-1000s. All at a fraction on the price.

Sometimes not running with the herd pays off :)

This website is not affiliated with or sponsored by Sharp. To purchase SM-3636H spares or accessories, please contact the company via their website or visit an authorised retailer.