hifi engine

Manual Library / Sherwood

Sherwood RD-6502

Audio Video Receiver

add a review add a review

Sherwood RD-6502


Tuning range: FM, MW

Power output: 100 watts per channel into 6Ω (stereo)

Surround output: 125W (front), 125W (center), 125W (rear)

Frequency response: 20Hz to 50kHz

Total harmonic distortion: 0.09%

Input sensitivity: 280mV (line)

Signal to noise ratio: 92dB (line)

Output: 280mV (line), 1V (Pre out)

Speaker load impedance: 6Ω (minimum)

Digital inputs: coaxial, optical

Video Connections: composite

Dimensions: 440 x 141 x 365mm

Weight: 9.5kg

Finish: black, silver

Accessories: remote control



re: RD-6502


my RD6502 amplifier does not work anymore. if I turn it on, a few seconds later, it goes into standby mode. Can you help me ?


re: RD-6502


Look at the troubleshooting section page 15 of the Service Manual. It has some guidance of where the fault may be, based on the symptoms.


This website is not affiliated with or sponsored by Sherwood. To purchase RD-6502 spares or accessories, please contact the company via their website or visit an authorised retailer.