hifi engine

Manual Library / Sony

Sony STR-D1015

Surround Sound Receiver (1994-95)

add a review (1 review)

Sony STR-D1015

Specifications

Tuning range: FM, MW

Power output: 120 watts per channel into 8Ω (stereo)

Surround output: 100W (front), 100W (center), 100W (rear)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.15%

Input sensitivity: 2.5mV (MM), 250mV (line)

Signal to noise ratio: 75dB (MM), 82dB (line)

Output: 250mV (line)

Speaker load impedance: 4Ω (minimum)

Video Connections: composite

Dimensions: 430 x 160 x 425mm

Weight: 13.1kg

Accessories: FM wire antenna, AM loop antenna, remote commander

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed Nov 23rd, 2013 by leonardthefast

This is a great a/v receiver with one exception: the station tuner settings are too complicated, imo. I consider myself an experienced audiophile and I still had difficulty acquiring and setting radio stations. Also, if you live in a rural area, as I do, you definitely need a coaxial fm antenna. The home theater functions are great considering the age of my unit.

 

Comments

re: STR-D1015

I didn't realize until looking at the schematic that in these old receivers the two rear surround channels where tied together to the same amp, really a mono channel.

This website is not affiliated with or sponsored by Sony. To purchase STR-D1015 spares or accessories, please contact the company via their website or visit an authorised retailer.