hifi engine

Manual Library / Sony

Sony TA-1144

Stereo Integrated Amplifier (1970-71)

add a review add a review

Sony TA-1144

Specifications

Power output: 30 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.1%

Input sensitivity: 1.2mV (MM), 150mV (line)

Signal to noise ratio: 70dB (MM), 90dB (line)

Output: 150mV (line), 20mV (DIN), 0.9V (Pre out)

Dimensions: 422 x 148 x 321mm

Weight: 7.8kg

Year: 1970

Downloads

Related Catalogues

Complete Range

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: TA-1144

FYI: This model uses same power amp module as the TA-3060. Damping factor listed at 180 and frequency response is amazing. Only oddball aspect of the '1144 is loudspeaker switches are pushed in for "Off" (out is loudspeaker enabled position). Otherwise the unit is superb performer with three Aux inputs and Pre Out/Power In connections. Tone controls are dual-highly accurate stepped-switches with resistor ladders. Only major limitation is the single Tape Monitor loop.

This website is not affiliated with or sponsored by Sony. To purchase TA-1144 spares or accessories, please contact the company via their website or visit an authorised retailer.