Stereo Integrated Amplifier (1989)
Power output: 35 watts per channel into 8Ω (stereo)
Frequency response: 7Hz to 100kHz
Total harmonic distortion: 0.7%
Damping factor: 40
Input sensitivity: 2mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MM), 100dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Dec 11th, 2014 by bert49
Hello, An Amplifier with remote controlled Volume, that was what I was looking for. The sony F 210 I knew allready and was surprisingly good (for the money) but had no remote.
This one seems to have a little less power but with fresh Capacitors and a solderjoint-check is ok to create a nice soundstage. Thanks to it's source direct...