hifi engine

Manual Library / Sony

Sony TA-F670ES

Stereo Integrated Amplifier (1991-92)

add a review (1 review)

Sony TA-F670ES


Power output: 100 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.004%

Damping factor: 100

Input sensitivity: 0.17mV (MC), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 77dB (MC), 95dB (MM), 105dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω (minimum)

Dimensions: 430 x 150 x 375mm

Weight: 12.5kg

Year: 1991


Related Catalogues

Sound and Vision

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Sep 11th, 2014 by Smoke Screen

The F670ES is a upgraded F570ES. Both amps share the same pcb-set,but F670 has 4x 12000µF instead of 2x in F570. Inductors are added in the powerlines for the driverstages and a couple other passive parts are of slightly higher quality. Does that make the F670 the better amp? A little bit,but not realy noticable. What i wrote for the F570 applies also for F670.



re: TA-F670ES

Brilliant amp, lots of clean power, really just great, Sony ES series, you can t go wrong

This website is not affiliated with or sponsored by Sony. To purchase TA-F670ES spares or accessories, please contact the company via their website or visit an authorised retailer.