hifi engine

Manual Library / Tandberg

Tandberg HiFi FM

FM Stereo Receiver (1969-72)

add a review add a review

Tandberg HiFi FM


The Tandberg tuner-amplifier Hi-Fi FM is the ideal unit in a musical installation when you need an FM receiver in addition to the stereo amplifier.

The receiver surpasses the DIN standard 45500 for Hi-Fi equipment.

The amplifiers provide 2 x 15 watts RMS, pre-set controls allow press-button operation of 6 FM stations. RIAA equalized pre-amplifier for magnetic pick-up and high impedance input socket for ceramic pick-up. Bass and treble are boosted at low setting of the volume controls.

The receiver is intended for use together with Tandberg Hi-Fi loudspeakers, with the Hi-Fi FM as the centre of a musical installation you are ensured a crystal clear sound reproduction.

To the Hi-Fi FM receiver can be connected a Tandberg tape recorder for instance Model 3000X Stereo, a record player and Tandberg HiFi loudspeakers.

Available in choice teak or rosewood, prepared for or fully equipped for stereo FM reception.


Tuning range: FM

Power output: 15 watts per channel into 4Ω (stereo)

Frequency response: 15Hz to 40kHz

Total harmonic distortion: 0.5%

Damping factor: 13

Input sensitivity: 2.5mV (MM), 50mV (ceramic), 250mV (line)

Signal to noise ratio: 50dB (MM), 51dB (ceramic), 53dB (line)

Output: 220mV (line)

Semiconductors: 29 x transistors, 24 x diodes

Dimensions: 425 x 135 x 215mm

Weight: 5.1kg

Finish: teak, rosewood

Year: 1969


Related Catalogues

Living Sound


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Tandberg. To purchase HiFi FM spares or accessories, please contact the company via their website or visit an authorised retailer.