hifi engine

Manual Library / TEAC

TEAC 505

Stereo Tape Recorder

add a review add a review

TEAC 505

Specifications

  • Track system: 4-track, 2-channel, stereo/monaural system

    Heads: 1 x 2T playback, 1 x 4T playback, 1 x 4T record, 1 x 4T erase

    Motor: 1 x capstan, 2 x reel

    Tape speeds: 3 34  7 12 ips

    Wow and flutter: 0.15% (7 12 ips)

    Frequency response: 50Hz to 15kHz (7 12 ips)

    Signal to Noise Ratio: 45dB

    Output: 1V (line)

    Dimensions: 16-1/4 x 14-1/8 x 6-3/8 inches

    Weight: 37lbs

  • Track system: auto reverse, 4-track, 2-channel, stereo/monaural system

    Heads: 2 x 4T playback, 1 x 4T record, 1 x 4T erase

    Motor: 1 x capstan, 2 x reel

    Tape speeds: 3 34  7 12 ips

    Wow and flutter: 0.15% (7 12 ips)

    Frequency response: 50Hz to 15kHz (7 12 ips)

    Signal to Noise Ratio: 45dB

    Output: 1V (line)

    Dimensions: 16-1/4 x 14-1/8 x 6-3/8 inches

    Weight: 37lbs

Downloads

Comments

re: 505

Problem is that I rebuilt my 505R and almost solved all problems but it plays simultaneously through forward and reverse playback heads but the schematic is not for the 505R so I can't find the detail about reverse and forward heads wiring diagram in the schematic.....

This website is not affiliated with or sponsored by TEAC. To purchase 505 spares or accessories, please contact the company via their website or visit an authorised retailer.