hifi engine

Manual Library / TEAC

TEAC AG-6000

AM/FM Stereo Receiver

add a review (1 review)

TEAC AG-6000

Specifications

Tuning range: FM, MW

Power output: 50 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 30kHz

Total harmonic distortion: 0.5%

Damping factor: 80

Input sensitivity: 2mV (MM), 150mV (line)

Signal to noise ratio: 65dB (MM), 70dB (line)

Channel separation: 50dB (MM), 50dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 16-1/4 x 4-3/4 x 14 inches

Weight: 24.2lbs

Downloads

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Apr 20th, 2017 by glennsmga

This receiver is a class act! Built like a tank. Has an incredibly sensitive tuner, that picks up numerous AM and FM stations. This receiver has 50 watts per channel, but it sounds like a lot more. These are old school RMS watts. This receiver can easily shake the walls when cranked! This receiver easily trounces modern equipment with double the wattage! This unit has in incredible phono section. Sound is clear accurate and detailed with lots of clean bass. If you can get your hands on one of these receivers, grab it and be amazed!

 

Comments

This website is not affiliated with or sponsored by TEAC. To purchase AG-6000 spares or accessories, please contact the company via their website or visit an authorised retailer.