hifi engine

Manual Library / TEAC


Stereo Graphic Equalizer (1993-97)

add a review (2 reviews)



Input Sensitivity: 300mV

Output Level: 6V (max)

Frequency response: 10Hz to 100kHz

Signal to Noise Ratio: 90dB

Total harmonic distortion: 0.01%

Control Range: ± 12dB

Frequency Bands: 30, 60, 125, 250, 500, 1K, 2K, 4K, 8K, 16KHz

Dimensions: 435 x 83 x 213mm

Weight: 2.7kg

Year: 1993


Related Catalogues

Audio Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Aug 13th, 2015 by Brian Richmond

Bought used, $25 CDN. Excellent equalizer. I am using it with a Harman/Kardon AVR 85, also excellent, I bought used for $40 CDN. Vintage audio is the best!

Reviewed Jun 07th, 2013 by mail2manjue

superb and well performance



Ignacio Capozzi's picture

re: EQA-220

Does anyone have the owners manual of this equalizer, or the EQA 22?
Thanks a lot!

re: EQA-220

Having trouble hooking this up. Can anyone tell me the correct way to hook this up to the tape monitor on my receiver?

re: EQA-220

I have this equalizer too. I recently moved, so I had the pleasure of hooking the entire system up again. My TEAC receiver has a Tape2 Monitor function. I hooked the Tape 2 "play" to the equalizer's "line out" connector, and the Tape 2 "rec" to the equalizer's "line in" connector. When the "Tape2 Monitor" button is pressed, any source playing through the amplifier is routed through the equalizer. Note that you don't actually need a tape deck for this to work. A tape deck would still be connected to the Tape 1 connector and routed through the "Tape" connectors on the equalizer. This system is 25 years old and still going strong!

re: EQA-220


I have the cheaper version of this great equalizer (EQA-180). I have issues with the slider on the left channel. On the 250 Hz band, as the control slides, the signal starts to make a very high scratch sound and then, the signal of the left channel may cut totally!.

I tried with a grease Lub for electronics equipment, but the problem persists!

any helpdful advice...I am starting to dissamble it (8-ยก .

Thanks to Hi Fi engine for uploading the scamatics!


This website is not affiliated with or sponsored by TEAC. To purchase EQA-220 spares or accessories, please contact the company via their website or visit an authorised retailer.