hifi engine

Manual Library / Technics

Technics SA-190

AM/FM Stereo Receiver (1986-88)

add a review add a review

Technics SA-190

Specifications

  • Tuning range: FM, MW

    Power output: 35 watts per channel into 8Ω (stereo)

    Frequency response: 10Hz to 70kHz

    Total harmonic distortion: 0.07%

    Damping factor: 20

    Input sensitivity: 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 72dB (MM), 95dB (line)

    Channel separation: 55dB (line)

    Output: 150mV (line)

    Speaker load impedance: 8Ω to 16Ω

  • Tuning range: FM, MW, LW

    Power output: 35 watts per channel into 8Ω (stereo)

    Frequency response: 10Hz to 70kHz

    Total harmonic distortion: 0.07%

    Damping factor: 20

    Input sensitivity: 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 72dB (MM), 95dB (line)

    Channel separation: 55dB (line)

    Output: 150mV (line)

    Speaker load impedance: 8Ω to 16Ω

Downloads

Related Catalogues

HiFi

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

sbrservice's picture

re: SA-190

thx for this
Will have a look at the memory-back-up circuit as the stations on my receiver are "running away"

This website is not affiliated with or sponsored by Technics. To purchase SA-190 spares or accessories, please contact the company via their website or visit an authorised retailer.