hifi engine

Manual Library / Technics

Technics SA-290

Synthesizer AM/FM Stereo Receiver (1986-89)

add a review add a review

Technics SA-290

Specifications

  • Tuning range: FM, MW

    Power output: 50 watts per channel into 8Ω (stereo)

    Frequency response: 10Hz to 70kHz

    Total harmonic distortion: 0.02%

    Damping factor: 20

    Input sensitivity: 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 72dB (MM), 95dB (line)

    Channel separation: 55dB (line)

    Output: 150mV (line)

    Speaker load impedance: 4Ω to 16Ω

  • Tuning range: FM, MW, LW

    Power output: 50 watts per channel into 8Ω (stereo)

    Frequency response: 10Hz to 70kHz

    Total harmonic distortion: 0.02%

    Damping factor: 20

    Input sensitivity: 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 72dB (MM), 95dB (line)

    Channel separation: 55dB (line)

    Output: 150mV (line)

    Speaker load impedance: 4Ω to 16Ω

Downloads

Related Catalogues

HiFi

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: SA-290

I believe the Technics SA-290 is also known as the SA-929 and The SA-2029 ...

This website is not affiliated with or sponsored by Technics. To purchase SA-290 spares or accessories, please contact the company via their website or visit an authorised retailer.