hifi engine

Manual Library / Technics

Technics SA-5360

AM/FM Stereo Receiver (1976-77)

add a review (1 review)

Technics SA-5360


Tuning range: FM, MW

Power output: 38 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.3%

Damping factor: 40

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 75dB (MM), 90dB (line)

Output: 180mV (line), 30mV (DIN)

Speaker load impedance: 4Ω (minimum)

Dimensions: 420 x 142 x 355mm

Weight: 9kg


Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Jun 13th, 2016 by sp10

This little tuner amp punches above it weight sonically.
It has a dry well controlled sound with good bass slam when needed, the tuner works perfectly on FM I only have an outside wall mounted 300ohm multidirectional aerial but it picks up BBC3 perfectly with very quiet background noise.
Well built in the 1970s Japanese tradition I was suprised to find it had STK power blocks fitted but they work well in this
As you can see I am impressed by this unit.
I shall try some re-capping some time to see if that changes anything for the better.



This website is not affiliated with or sponsored by Technics. To purchase SA-5360 spares or accessories, please contact the company via their website or visit an authorised retailer.