hifi engine

Manual Library / Technics

Technics SA-GX690

AV Control Stereo Receiver (1995-96)

add a review add a review

Technics SA-GX690

Specifications

Tuning range: FM, MW

Power output: 90 watts per channel into 8Ω (stereo)

Surround output: 70W (front), 70W (center), 70W (rear)

Frequency response: 10Hz to 40kHz

Total harmonic distortion: 1%

Damping factor: 30

Input sensitivity: 3mV (MM), 200mV (line)

Signal to noise ratio: 80dB (MM), 88dB (line)

Channel separation: 55dB (line)

Output: 200mV (line)

Speaker load impedance: 8Ω to 16Ω

Video Connections: composite

Dimensions: 430 x 158 x 352mm

Weight: 10.1kg

Accessories: remote control

Downloads

Related Catalogues

HiFi

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: SA-GX690

Sometimes when volume is turned up the system trips off due to overload, if tap the fan at the back of the unit it comes on and the unit functions ok when volume is turned up.
I WILL LIKE TO GET THE SPECIFICATION OF THE FAN UNIT OR ORDER A NEW FAN

re: SA-GX690

My reset button is on, I have pressed it and nothings happens. Sound is not coming out of the speakers? Any ideas?

This website is not affiliated with or sponsored by Technics. To purchase SA-GX690 spares or accessories, please contact the company via their website or visit an authorised retailer.