hifi engine

Manual Library / Technics

Technics SA-TX50

Home THX Control Receiver (1996-99)

add a review add a review

Technics SA-TX50


Tuning range: FM, MW

Power output: 125 watts per channel into 8Ω (stereo)

Surround output: 120W (front), 120W (center), 120W (rear)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.05%

Input sensitivity: 300mV (line)

Signal to noise ratio: 70dB (line)

Speaker load impedance: 4Ω to 16Ω

Video Connections: composite, SVHS

Dimensions: 430 x 170 x 375mm

Weight: 12kg

Accessories: remote control


Related Catalogues

Advertising and Truth

DVD Video


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: SA-TX50

I’m not normally a fan of 90’s receivers, but this one is an exception.
The sound and performance is very good and it’s easy on the eye too.
You need an add on decoder for later surround formats as it’s old school, which I picked up off eBay.
It has no HDMI’s etc, you have to use a splitter and feed it, still it does a great job, with plenty of power to boot, not at 10% thd like a lot of others now.

re: SA-TX50

hi, could anyone tell me the correct lamps to use in the display of the sa-tx 50,
I kinda know the type but its the rating that I'm really not sure about, there seems to be two I could choose from as far as I can make out, one is a 100mA / 8 volt version, and the other a 55mA / 10-15volt version,
any help much would be appreciated, thanks ._.

This website is not affiliated with or sponsored by Technics. To purchase SA-TX50 spares or accessories, please contact the company via their website or visit an authorised retailer.