hifi engine

Manual Library / Technics

Technics SU-Z11

Stereo Integrated Amplifier (1982)

add a review (1 review)

Technics SU-Z11

Specifications

Power output: 25 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.04%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 80dB (MM), 97dB (line)

Output: 150mV (line)

Dimensions: 430 x 86 x 288mm

Weight: 5.1kg

Year: 1982

Downloads

Related Catalogues

A Class Of Its Own

HiFi

HiFi Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Aug 08th, 2017 by Popescu Tudor

Nice little amplifier, entry level but drives speakers ok,
Not very hi fi but has low distortion, it is solid and simple to use. Very boomy with activated loudness. Vu meters not very acurate. Pots were a little noisy but solved them. Do not use 4 ohm speakers! It will overheat and probably fail! Although it is specified it can run on 4 ohms. Use 8 ohms, will not overheat, will not distort and the sound will be just fine. Using it with a technics st-z250 is ok for office, and a pair of jvc speakers sp mx44 from a scrapped mini system. For office is ok, the speakers are low end but all the equipment was bought for peanuts at a garage sale, especially for office.

 

Comments

This website is not affiliated with or sponsored by Technics. To purchase SU-Z11 spares or accessories, please contact the company via their website or visit an authorised retailer.