hifi engine

Manual Library / Wangine

Wangine WNA-120

Stereo Integrated Amplifier

add a review add a review

Wangine WNA-120

Specifications

Power output: 130 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 70kHz

Total harmonic distortion: 0.05%

Damping factor: 60

Input sensitivity: 0.28mV (MC), 2.8mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 64dB (MC), 88dB (MM), 96dB (DIN), 96dB (line)

Output: 120mV (line), 30mV (DIN)

Speaker load impedance: 4Ω (minimum)

Semiconductors: 2 x FET, 4 x IC, 26 x transistors, 19 x LED, 12 x diodes, 2 x bridge rectifiers

Dimensions: 422 x 127 x 340mm

Weight: 9.5kg

Downloads

Comments

This website is not affiliated with or sponsored by Wangine. To purchase WNA-120 spares or accessories, please contact the company via their website or visit an authorised retailer.