hifi engine

Manual Library / Yamaha

Yamaha CA-2010

Stereo Integrated Amplifier (1977-80)

add a review (1 review)

Yamaha CA-2010


Power output: 120 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 50kHz

Total harmonic distortion: 0.005%

Damping factor: 45

Input sensitivity: 0.5mV (MC), 2mV (MM), 120mV (line)

Signal to noise ratio: 71dB (MC), 82dB (MM), 100dB (line)

Output: 120mV (line), 1V (Pre out)

Dimensions: 461 x 360 x 170mm

Weight: 21kg


Related Catalogues


Natural Sound

Natural Sound Stereo Components

Natural Sound System

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Mar 02nd, 2018 by tegreene

My unit was modified to 150 watts per channel several years ago by Gordon Miller Music in Baltimore, Md.



re: CA-2010

Can you provide any documentation on the modifications done on this unit or the contact information for the shop? I am picking one up and getting the Cap upgrade pack from Krari (in Bulgaria) who advertises on ebay. I want to do some other mods to it like resistor and power supply cap upgrades. I don't need the additional power, just want the best sound and reliability possible. I will just be using it in Class A, going into 16 ohm efficient speakers, probably I only need about 10W max.

Thank you,


patso's picture

re: CA-2010

Hello, thinking of getting the same cap kit. Was it as advertised? Thanks.

This website is not affiliated with or sponsored by Yamaha. To purchase CA-2010 spares or accessories, please contact the company via their website or visit an authorised retailer.