hifi engine

Manual Library / Yamaha

Yamaha CA-V2

Stereo Integrated Amplifier (1978)

add a review add a review

Yamaha CA-V2


Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.01%

Damping factor: 50

Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 85dB (MM), 100dB (line)

Channel separation: 65dB (MM), 65dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 45 x transistors, 23 x diodes, 2 x zener diodes, 1 x LED

Dimensions: 435 x 139 x 333mm

Weight: 7.8kg

Year: 1978



Edelbrok's picture

re: CA-V2

Very good amplifier. Clear and soft sound. I just change lamps on the indicators - thats all problem during long expluatation.

the_spy's picture

re: CA-V2

I can't get the left channel to work. The fault doesn't seem to be in the balance/volume adjuster.

re: CA-V2 / Lamps

Like to change lamps, too ... are they running in a row ? Or each separate ... dont get it goin ...

Thx & Cheers, Sven

re: CA-V2 / Lamps

Solved ... works now

This website is not affiliated with or sponsored by Yamaha. To purchase CA-V2 spares or accessories, please contact the company via their website or visit an authorised retailer.