hifi engine

Manual Library / Yamaha

Yamaha HTR-5150

5-Channel Audio Video Receiver

add a review add a review

Yamaha HTR-5150

Specifications

Tuning range: FM, MW

Power output: 70 watts per channel into 8Ω (stereo)

Surround output: 70W (front), 70W (center), 70W (rear)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.07%

Damping factor: 60

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 86dB (MM), 96dB (line)

Channel separation: 55dB (MM), 45dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω (minimum)

Digital inputs: coaxial, optical

Video Connections: composite, SVHS

Dimensions: 435 x 151 x 391mm

Weight: 12.5kg

Accessories: remote control

Downloads

Comments

good stuff

i would like to thank the up loader very much for the service manual!!!

as I'm not sure if i can fix this (powers on then off after 2 secs)

thanks to site owner for making this site Free :)

EDIT: :( still can't figure out why it shuts off after 2 secs, i know it the protect function, but the service manual does not have a troubleshooting section, only has a diagnostic section but the amp needs to stay on for it to be useful lol )

This website is not affiliated with or sponsored by Yamaha. To purchase HTR-5150 spares or accessories, please contact the company via their website or visit an authorised retailer.