hifi engine

Manual Library / Yamaha

Yamaha RX-350

AM/FM Stereo Receiver (1990-92)

add a review add a review

Yamaha RX-350

Specifications

Tuning range: FM, MW

Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.04%

Damping factor: 50

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 87dB (MM), 103dB (line)

Channel separation: 55dB (MM), 52dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 435 x 131 x 292mm

Weight: 5.2kg

Downloads

Related Catalogues

HiFi

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

rdpadgett's picture

re: RX-350

For my "Audiophile on the Cheap" computer based sound system, the Yamaha RX-350 Natural Sound amplifier, in the CD-Direct mode is just perfect. The Heart of my system is a old Dell Computer with 4 GB of RAM, and a Solid State drive. My library is stored on an external 4 Tb drive and the integral element is the Schitt Modi-2 external DAC which handles up to 24-192 FLAC files. I run bit-perfect Audacious with the ALSA plug-in. My speakers are also vintage--the 1970s Advent Loudspeaker, with new foam rings in 1990.

This website is not affiliated with or sponsored by Yamaha. To purchase RX-350 spares or accessories, please contact the company via their website or visit an authorised retailer.